List Price: $409.00 Price: $230.00 You Save: $179.00 (44%)
Maintenance free end cap filter (US patent 5637125) captures dirt and sand down to microns but lets oil and air into the tool. Filter keeps inside parts clean and lasting longer than competitors tools with out filters
Only 12-1/4-Inch tall to fit between 16-Inch on center framing easily
List Price: $429.00 Price: $299.99 You Save: $129.01 (30%)
Tar resistant nose (patent pending). The nose of the CN445R is designed to resist tar four times longer than conventional tools. This equates to less time spent cleaning the tool and more productivity
Maintenance free end cap filter (US patent 5637125) captures dirt and sand down to microns but lets oil and air into the tool. Filter keeps inside parts clean and lasting longer than competitors tools with out filters
Dial adjustable depth control dial depth control requires no special tools, providing accurate depth control
List Price: $429.00 Price: $292.00 You Save: $137.00 (32%)
Maintenance free end cap filter (us patent 5637125) captures dirt and sand down to microns but lets oil and air into the tool; filter keeps inside parts clean and lasting longer than competitors tools with out filters
Only 11-7/8-Inch tall to fit between 16-Inch on center framing easily
8 gallon compressor
1.1 sustained HP, 125 max PSI
4.3 scfm @ 40PSI, 3.5 scfm @ 90PSI
3,400 pump rpm induction motor
120V, 13A
Includes 25' PVC hose
Yes. As covet as you develop at least 70 psi you should be just fine. I have a Porter Cable framing gun and it works fantabulous from 70-120 psi. I'm using a 4-gallon pancake compressor with it. Cycles a bit more often than the larger tanks but since
Zac S | Jun 06, 2008
That is a big compressor, you can do almost anything with it. But, be familiar with up the specs on the gun and check with the ones for the compressor.
demaissoneuve | Jun 06, 2008
Air Compressor choosing help for using a framing nailer and other nailers?
Dec 06, 2006 by ADKstorm | Posted in Decorating & Remodeling
I am a weekend do-it-yourselfer looking to buy an air compressor to aid in a occupation basement finishing of a 12’ x 12’ room. One tool I would like to use is a framing nailer with an air compressor to construction the partition walls. I really don’t
I own the Airports skycap Cable compressor you mention and it works fine with a framing nailer. It also is very portable which is a huge asset if you necessary to work on a different part of the house later. However, I find myself wishing I had a larger
carcoandrew | Dec 06, 2006
Nailers Directory
Max Nailers Product Listing
MAX "SUPER ROOFER" 15_ COIL NAILER (3/4" - 1 3/4") MAX 15 Ga. ANGLED FINISH NAILER (1" - 2") BOST. MAX 15 Ga. DA ANGLED FINISH NAILER W/CS (2 1/2" ...